Price:Unfilled

Send inquiry

Include YD-DJ662, YD-DJ665, YD-DJ666 Remote Controlled Medical Linear Actuator for Hospital Bed. Applied to medical beds, ambulance stretchers, dental chairs, etc.

 

 

 

Input Voltage	24V DC
No-load Speed	2.7~18mm/s
Maximum Load	6000N
Protection Level	IP65/IP67
Maximum Stroke	Customized according to customer requirements
Noise level	≤45db
Controller	Wired controller
Ambient Temperature	5℃~40℃
Color	Grayish white and Black

 

 

 

S(Stroke)	50≤S≤1000
L min	S+230

 

 

 

3. Soft and low noise

The noise is less than 55dB, and the pure copper motor and product structure are optimized to make the operation more efficient

 

 

 

Input Voltage	24V DC
No-load Speed	4~40mm/s
Maximum Load	6000N
Protection Level	IP54
Maximum Stroke	Customized according to customer requirements
Noise level	≤45db
Controller	Wired controller
Ambient Temperature	5℃~40℃
Color	White and Black

 

 

 

S(Stroke)	50≤S≤1000
L min	S+175

 

 

 

 

Input Voltage	24V DC
No-load Speed	4~40mm/s
Maximum Load	6000N
Protection Level	IP54
Maximum Stroke	Customized according to customer requirements
Noise level	≤45db
Controller	Wired controller
Ambient Temperature	5℃~40℃
Color	White and Black

 

 

 

S(Stroke)	50≤S≤1000
L min	S+175

 

 

 

YD-DJ662, YD-DJ665, YD-DJ666 silent linear actuator is the most widely used electric actuator in the medical furniture industry. The maximum load is 6000N, stroke 100~1000mm can be customized. It is an electric drive device that converts the rotary motion of the motor into the linear motion of the push rod. The linear movement of the push rod is completed by controlling the electric forward and reverse rotation. Mechanisms such as levers, rockers or connecting rods can complete complex actions such as rotation and swing. It can be equipped with hand controller, remote control, etc. for control. It is the most extensive in the fields of skylights, fire fighting equipment, medical equipment, electric sanitation vehicles, electric furniture, and mechanical equipment.

 

 

 

 

1. The electric push rod produced by the company is fixed on the straight line guidance mechanism when installed. Do not cause mechanical interference to avoid the failure of the motor or mechanical structure.

2. Please input the DC power supply according to the voltage specifications calibrated by the electric actuator.

3. If the customer provides the power supply and controller by himself, please install the overload detection device by himself to ensure that the electric actuator is not damaged when working.

4. In addition to special customization, the rated operation rate of the company's electric actuator is 10%, which defines continuous operation for 2 minutes and 18 minutes of rest.

5. The motor of the electric push rod is a DC motor, and when the power input line of the motor is intermodulated, the output shaft of the electric push rod moves in the opposite direction.

6. Do not apply the load to the electric actuator that is calibrated to the specification.

 

http://www.gerdongroup.com/