Description: Universal remote control differential pressure transmitter provide several credible measure method for avoiding the medium contact the membrane of the transmitter, application as follow. 1.transmitter need to be isolated from high temperature medium 2.medium is able to corrupt the sense organ of the transmitter 3.suspension or High Viscosity medium 4.medium would curing or crystallization 5.If change the medium, the connection need to be cleaned strictly. 6.connection must keep clean. Range Range code Range Measuring range Min. Max. 4 0.374KPa 37.4KPa -37.4~37.4KPa 5 1.868KPa 186.8KPa -186.8~186.8KPa 6 6.9KPa 690KPa -690~690KPa 7 20.68KPa 2068KPa -2068~2068KPa 8 68.9KPa 6890KPa -6890~6890KPa Technical Data Output Analog output: two –wire 4-20mADC Digital output: two –wire 4-20mADC and superimposing variable digital signal accord with HART Power supply supply voltage 12.5-45VDC Limit load Max load resistor Rmax in loop decided by the supply voltage, see the below drawing. HART PROTOCOL require the load resistor not less than 250Ω,not more than 600Ω Communication distance Max. 1.5Km, multi-address communication can connect 15 smart transmitters Max. Display 4 digital display,5 digit LCD display, pointer type. Explosion-proof ExiaIICT5;explosion suppression type Zero offset Can positive transfer or negative transfer, but can not overstep the utmost value Temperature ambient temperature -40-85℃(When choose LCD : -20-70℃) Medium temperature -40~104℃ Filled oil operating Tem. Silicon oil:-29~+149℃ inert oil:-18~+204℃ Static pressure and single side overpressure 3.45KPa(Absolute)~13.78MPa Relative humidity 5~98%RH Run-up time less than 5 sec. Capability change Less than 0.16cm3 Damp adjust 0.20~25 second