Current rectifier power supply Technical Parameters

Model	ZHS60000A/1500V	Efficiency	≥99.7%
Input Voltage	AC110KV	Rated Voltage	DC1500V
Input Current	AC332A	Rated Current	DC60000A
Range of Regulation	On-load Voltage + Switch  Regulation: 15%-105% Udn
Notes forOrder	Input Voltage	AC300V-330KV	Optional
	Frequency	40-60Hz	Optional
	Current Regalation		Optional
	Voltage Regulation		Optional
	Rated Current		Optional
	Rated Voltage		Optional
	Cooling Mothed	Water,Air,natural or Forced Draft Cooling	Optional

 If you have any specific demands,please tell us the parameters in details. We’ll be more than happy to work with you to meet your exact requirements. The High Current Rectifiers listed on this website is customized, just for your reference.

The main parameters of our High Current Rectifiers for Industrial Applications:

A）Voltage Specification:  5V - 3000V

B) Current Specification:  300A - 240000A

C) Output Current Adjusting Range： 0 - 1000A

Digest of High Current Rectifier（HCR）technical documents.

Part two of  L SS— Series Pure water cooling device

 

 Instruction Manual

CONTENTS 

 

Ⅰ、Introduction ¨¨¨¨¨¨¨¨¨¨¨¨¨¨2 

Ⅱ、Explanation of type   ¨¨¨¨¨¨¨¨¨¨¨2 

Ⅲ、Principle of structure ¨¨¨¨¨¨¨¨¨¨¨2 

Ⅳ、Technical Parameters  ¨¨¨¨¨¨¨¨¨¨¨4 

Ⅴ、Application ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨5 Ⅵ、Maintenance¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨7

Ⅰ、Introduction

 

The device is to be used as corollary equipment to provide large-power water-cooling silicon rectifying equipments and variable frequency equipments with protection by cooling them.

The device delivers pure water (deionized water) steadily at rated temperature, pressure and flow to the primary equipment to avoid scaling and electro corrosion of the cooling conduit of the primary equipment, thus ensuring safe and reliable operation of the equipment at rated temperature range. Ⅱ、Explanation of type

Ⅲ、Principle of structure

Cooling device

 

The device consists of heat exchangers, pump sets, ion exchangers, pipeline, low punch expansion water tank and electrical control box. The principle of device is shown in diagram 1. The heat-carrying pure water from the primary equipment passes the low punch expansion water tank and

the steam trap successively, and  after being pressurized by the working pump，enters the heat

 

exchanger to pass on its heat to secondary cooling water by partition wall type heat-transfer through the automatic diverting valve V15 and the inlet valve of heat exchanger (pressure regulating valve) V16 or V17. The cooled pure water flows through the outlet of our device and the connection pipeline to enter the cooling conduit of the primary equipment to absorb heat and returns to our device. The whole procedure goes round and round and form a closed loop. At the same time, the secondary cooling water with absorbed heat from the heat exchanger flows out.

As affected by various factors during circulation, quality of pure water decreases gradually, an ion exchanger bypass for the main loop is set to replenish the loop with high-purity water so as to ensure the quality of the pure water in the main loop. MB20-containing ion exchanger makes high water in mixed-bed way.

The motive part of this device is of twin pump design. One pump is spare for the other alternatively. Automatic changeover circuit and automatic inverted valve are adopted. If by any chance the working pump is overload, the working circuit will change over at once and the spare pump will go into operation  at the same ti  le. The inverted  valve will change the direction  of f10w  automaticallyno manual operation needed and water pressure will be restored instantaneously. ln additionThe failure pump can be repaired without shutdown

 

High Current Rectifier（HRC）ZHS60000A/1500V Structure Feature & Advantages

▲ Adopted cophase counter parallel connection Rectification，wihich can increase the power factor and reduce power loss

▲ Three-phase bridge rectification,which has the characteristics of reliability,stability,and low losses

▲ Adopted aluminum frame and glass antimagnetic cabinet, which suit for monitor and maintenance

▲ Power is scalable

▲ Can be maintained with electricity.

▲ With Low noise 

▲ Easy to operate 

▲ Superiority of Ture Rdundancy technique

▲Over / low Voltage protection    

▲Over / low current protection   

▲Over / lack water protection        

▲Over temperature protection

▲Fast fuse protection      

▲Phase protection  

 

It applies to large-current DC power supply in the electrolytics industry and metal industry and can be used as power supply for aluminum, magnesium, zinc, manganese and lead electrolysis, DC electric arc furnace melting, salt electrolysis, water electrolysis, graphitization furnace and silicon carbide and the power supply of similar load nature.

1.Plating: Chrome, Zine, Nickel, Copper, Gold, Silver

2.Metal smelting: Aluminum, Copper,  Zine, Lead, Manganese, Magnesium, etc.

3.Ionic membrane: Electrolysis of salt, etc

4.Silicon carbide smelting & Graphitization furnace

5.Experimental power supply

6.Copper foil, aluminum foil special power supply

7.Electrochemical: Chlor-alkali, etc

8.Electrolysis: Copper, Zine, Tin, Lead, Aluminum foil, Copper foil

 

The expert teams with 20 years experience can supply equipment design,manufacture, upgrading and after sales service. It’s quality management system meets the requirement of the ISO9001:2008 standard. The Technical level of main equpment is ten years ahead in China,and the control system is twenty years ahead at home and abroad.

We service with pride and care and give you a best solution.

 

 

Packing Details:In iron sheet case with waterproof and anti collision treatment

Delivery Details: 1-3 months, depending on your technical parameters

 

 

Please give us the follows technical information before order:

1  A.C. INPUT

• A.C: rated voltage

• Phases

• Frequency

2  D.C. OUTPUT

• Rated D.C. voltage

• Rated D.C. current

• D.C. voltage fine control range (thyristors)

• D.C: current control range

• Accuracy of current fine control

• Pulse number

• Ripple

 

 

1. Within the first year, if you need any spare parts for replacement, we can provide to you without

paid. And we will offer lifelong technical support and service.

 

2. Within the first year, if you need any spare parts for replacement, we can provide to you without

paid. And we will offer lifelong technical support and service.

 

 

1.Q:Are you a factory or trading company?
A: We are a factory.

 

2. Q: Where is your factory? How can I visit there?

A: Our factory is located in Xi’an, middle part of China, about an hour bus ride from Xi’an Xianyang Airport, which in the starting point of Ancient Silk Road.Welcome to visit us.

 

3. Q:When can I get the price?

A:Usually we quote within 24 hours after we get your inquiry.